You find rust on your car, your pipes, your tools, your bike handles and on so many other metal surfaces after a snowy winter or rainy fall or just a humid summers. But what removes rust? Is there anything at all that can be done to remove that tarnish and rot from your valuables? Well, of course, there is and if you’re wondering what removes rust, you have landed on the right page.

Easy Methods of Removing Rust or Corrosion

1. Scrubbing

A great place you can begin as a home project is to just scrub off the rusty surface. We aren’t asking you to use your old rag – just get your hands on a ball of tin foil, a wire brush, some sandpaper or some steel wool and go bonkers. If the metal surface in question hasn’t formed rust too deeply, then you’re going to easily get rid of those flakes of rust in no time.

This is a great place to start and if it doesn’t work, you can move further down the list.

2. White Vinegar

If the rust was stubborn enough to stay on the surface after some wild scrubbing, then you need to come on a little stronger. Try using white vinegar. This is acetic acid, a very common substance that’s easily found in most households. All you will have to do is soak a whole rusted substance in the solution and rinse thoroughly. It is important to rinse these items once the rust has come off because white vinegar can actually damage metal surfaces.

3. Baking Soda

This is yet another common household item that can help you clean a lot of household messes. To make it work on rust formations, you will have to mix some baking soda with water and make a rich paste. This paste should be thick enough to stick onto the rusted metal surface and sit there for a little while. Later on, you can scrub off the paste using your wire brush and steel wool and the rusted surface should easily peel off.

If neither of the above-mentioned strategies work, then you need some chemical strength for your problem.

4. How to Get Rid Of Rust with WD-40

This multi-use product has been known to be a great counter. It’s agent against rust and as a preventative measure as well. All you will have to do is soak the rusted item with WD-40 and then scrub over it using a wire brush. Be sure to wash your hands after they come into contact with the product.

You can go ahead and test small areas of the rusted object in order to check whether WD-40 damages it. If you apply WD-40 regularly on surfaces that are prone to rust, you will never see the rust return. If normal WD-40 products don’t seem to work as efficiently as you imagined then you can also get yourself the WD-40 Specialist Penetrant. This product has been specially designed to penetrate grime and rust. So that it can be easily removed from any surface.

So has the rust gone yet?