HOW TO CLEAN YOUR GRUBBY MOTORBIKE THE RIGHT WAY?
If you love to enjoy long, leisurely rides on your motorbike, then keeping it clean is essential. No matter how sturdy or strong your motorbike may be, it faces the brunt of the weather, broken roads, and dirt & debris. Therefore, you need to clean your motorbike regularly to ensure that it remains in top working condition for many years.
Things you will need
WD-40® Fast Acting Degreaser
WD-40® Multi-use Product
Microfiber cloth
Soft-bristled brush
plastic bags to cover parts
two buckets
Step 1
Prep your bike before washing
Look for a shaded place to wash your bike. You may be wondering why? Well! The sun dries up the soap faster and leaves water streaks and soap marks all over the surface, which are difficult to remove. The next thing to take care of is the exhaust pipe. Plug it up or insert a clean rag to close it. Since water in the exhaust system will lead to many problems once you hit the road.
Another thing to keep in mind is to ensure that the bike has cooled down before you begin to wash it. If you had taken it for a spin, wait for a while till the engine & exhaust system have cooled off. Cover any wires, fuses, or exposed electrical components with plastic bags to avoid getting wet.
Step 2
Clean loose dirt & gunk deposits
Before the actual washing, we suggest rinsing your bike with water to remove loose dirt. For heavily soiled areas, like the chain, you can use WD-40 Fast Acting Degreaser. Spray it on the affected areas, and then after some resting time, wipe them using a soft clean cloth.
Step 3
Use two buckets & a sponge to wash the bike
Now, it’s time for the good old wash. Choose a mild detergent to clean your bike thoroughly and dissolve it in a bucket of water. Use two buckets of water for washing your motorbike. The two bucket method is best because it ensures that your cleaning device does not hold any dirt particles to scratch the motorbike surface.
We recommend using a sponge to clean the chrome parts, seats, and headlights. To clean the wheels and other metallic areas, use a soft-bristled brush to scrub the dirt & gunk. Keep rinsing the sponge and cleaning brush in the clean water regularly.
Step 4
Rinse your motorbike
Rinse your motorcycle with plenty of water thoroughly. Don’t waste too much time & quickly rinse the motorbike after you finish lathering it up. Also, try to be thorough while you hose down the motorbike, as any leftover detergent particles or remaining residue can cause corrosion.
Step 5
Dry & lubricate!
Use a microfiber cloth to dry up the motorbike. Microfiber cloths are ideal for cleaning. They can absorb water eight times their weight, making them perfect for drying surfaces & objects. Furthermore, their soft fibers ensure that they don’t leave any scratches on the paintwork.
After drying, you must lubricate all the exposed metallic parts. Lubrication ensures that these parts do not corrode or acquire rust. WD-40 Multi-use Product is the best choice for this job. Its applicator helps you reach the hidden nooks & crannies effectively.
Conclusion
We have explained the process of cleaning your motorbike quite thoroughly. Not only this, but we have also mentioned all the do's & don'ts that you need to focus on while washing your bike. Follow this 5 step guide & do the task like a pro at home!
Disclaimer
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
Contact Us
© 2025 WD-40 Company.
All Rights Reserved