If you are one of those people who hate solo cycling, merely because of the fear of being stranded in case the bike chain broke down. Then you have come to the right place. We will teach you how to fix your broken bike chain. And by learning this bike repair tip, you will not only become more confident on your next solo cycling trip. But it will also empower you to help another friend in need. All you have to do is get the right tools, have a little patience, and follow our five key steps.
A chain drift if your chain doesn’t have a fast link
An old toothbrush or a chain brush
A new link
To repair your bike chain, switch speeds to the middle position first. It will make the chain less tense and easier to handle. Once you have reached the desired speed, you can remove the chain from its axis. All you need to do is use a chain drift unless your chain has a quick link. To use the chain drift, follow the following video tutorial:
Once you have removed the chain, use an old toothbrush to remove dirt, grease residue, and rust from the chain links while applying the WD-40 Fast Acting Degreaser. It is crucial to clean your chain thoroughly. A clogged chain will not function smoothly and affect the performance of the bike too.
Each chain link is attached to other links by an axis. Find the broken link and detach it from the chain using the chain drift. To do this, follow the manipulation shown in the video. Push the axis halfway, just enough for the broken link to come off, but not too much for the axis to remain fixed to the nearby link.
While the pin is halfway outwards, remove the broken link. Use the same pin to secure the new link in the chain. After this step, you are almost on your way to the completion of chain repair.
Now, put the new link in place of the old one and put the chain back on its axis. Use the chain drift to reinstall it on its axis and close the removed links. If possible, replace the old link with the fast link of the chain. Thus, you will no longer need to drift-chain the prochain once you have repaired your bike chain.
Once the chain is back in place, consider lubricating it. Use a suitable lubricant like WD-40 Silicone Lubricant. It protects your chain from corrosion and prevents mud from clinging to the chain.
Disclaimer
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
June 11, 2021
© 2025 WD-40 Company.
All Rights Reserved