Office chairs can quickly become a hub for germs, dirt & debris if you do not perform regular cleaning & periodic maintenance. Employees not only use them while working but also when they are taking a break from work. Therefore, if you are responsible to clean office chairs, follow this actionable guide below. It will make this task simple and easy.
Ever since workplaces have become more open & less private, any form of noise is considered intrusive & annoying. Take, for example, the squeaking of the chairs. It not only irritates others; but is also a source of embarrassment for the owner. Squeaking often indicates a lack of lubrication. You can use WD-40 Multi-use Product to get rid of squeaky sounds. Use the smart straw or flexible straw to reach the hidden areas and lubricate them properly. Allow the chemical some resting time & then use a clean cloth to wipe any drip-off or excess chemical.
Dirt, debris, lint, hair & food crumbs often accumulate in the nook & cranny of office chairs. Therefore, whether the chair has upholstery or not, you can follow our steps to clean it.
Voila! The chair’s upholstery is fresh & clean in no time.
After you finish cleaning the upholstery, the next step is to clean the body of the chair. Use a mixture of liquid soap and lukewarm water in a spray bottle or any mild cleaner. Spray directly on the armrest & the areas beneath the seat. Use a cleaning cloth to wipe down the surfaces. You might find rust or surface-level corrosion on metallic chairs. No need to worry! WD-40 Multi-use Product will come in handy in tackling these rust stains. Spray directly on the affected area and let it rest for a few minutes. Then wipe it down with a clean cloth.
Rubber wheels in office chairs allow for easy movement. Wheels may be of varying size and structure but, the process of cleaning them remains the same.
The first step is to remove the wheels from the base of the chair. Scrape any debris from the office chair wheels with a putty knife, inserting it through the slots and under the wheel cover. Avoid using too much force or, you will end up creating marks on plastic wheels. Use a vacuum cleaner to remove any hair that has gotten caught on the wheels of the chair.
Wash them with warm soapy water. Use a brush to give the wheels a thorough clean-up. Rinse with plenty of water and let them dry. If you note that the wheels’ surfaces are scratched and uneven, you can lightly sand them with sandpaper. It will make the surface smooth & allow for unhindered movement on the floor. Don’t forget to lubricate the wheels using WD-40 Specialist Silicone Lubricant. It protects rubber against cracking & prevents friction too. Reattach the wheels to the chair once you finish all the steps of cleaning, washing & lubricating.
If you wish to extend the life of your office chairs, you must adopt the following maintenance routine.
Disclaimer
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
© 2025 WD-40 Company.
All Rights Reserved